Gateway E SERIES E-6000 Manual de usuario Pagina 108

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 190
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 107
102
Chapter 7: Adding or Replacing Components
www.gateway.com
5 Set any jumpers on the new drive to match the old drive. See the drive
documentation for further instructions.
6 Slide the new drive in, then slide the release lever toward the inside of the
case.
7 Reconnect the drive cables using your notes from Step 2. The red-striped
edge of the data ribbon cable indicates Pin 1 and corresponds with Pin 1
on the drive (typically on the side farthest from the power supply
connection). For more information, see the drive documentation.
8 Close the case by following the instructions in “Closing the case” on
page 95.
Vista de pagina 107
1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 189 190

Comentarios a estos manuales

Sin comentarios