Gateway FX Manual de usuario descargar pdf (Pagina 58)

CHAPTER 4: Upgrading Your Computer

4 Loosen the four captive screws that secure the heat sink

and fan assembly to the system board, then remove the

assembly and place it on a stable surface with the flat

surface of the heat sink (the side with the thermal

grease) up. (The four screws cannot be completely

removed.)

5 Push the processor release lever down, lift it completely

up, then lift the processor retention bracket.

6 Remove the processor from the system board.

7 Install the new processor onto the system board. Make

sure that Pin 1 on the processor (indicated by the

silk-screened arrow on the corner of the processor)

aligns with Pin 1 on the processor socket (indicated by

the absence of a pin hole in the processor socket), then

return the retention bracket and lever to their locked

position.

Screws (only one shown)

8512834.book Page 52 Wednesday, November 7, 2007 1:31 PM

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 139 140

Sin comentarios

Gateway FX Manual de usuario Pagina 58